When did native IOS begin to support the IDS module?
According to this page
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a0080092341.html
Catalyst Switch Platform Requirements:
Requires Catalyst Operating System Version 6.1(1) or
higher (not supported in native Cisco IOS. software)
According to documentation for the most recent native
IOS code for the 6000/6500 the IDS module is still
"unsupported hardware"
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_2864.htm#xtocid9
The 10 GigE cards are also *not* supported hardware in
the most recent version of native IOS.
One more side note: The new Firewall Service Module
is not supported with native IOS either.
Unless you have the VPN blade, I'd stick with CatOS
Hope that helps
Regards,
Bryan
--- Justin Menga <Justin.Menga@xxxxxxxxxxxxxx> wrote:
> Don't know about the 10GE Blade - you'll need an SFM
> though.
>
> You can use CatOS and Cisco IOS for IDS module...
>
> -----Original Message-----
> From: Matt Hill [mailto:mhill@xxxxxxxxxxxxx]
> Sent: Thursday, December 05, 2002 8:45 PM
> To: security@xxxxxxxxxxxxxx
> Subject: RE: Cat 6k IOS/CatOS
>
>
> Does the IDS blade need the CatOS, or can you use
> the IOS?
>
> Also, what about the 10GBit Ethernet blade?
>
> Matt
>
> > -----Original Message-----
> > From: nobody@xxxxxxxxxxxxxx
> [mailto:nobody@xxxxxxxxxxxxxx] On Behalf
> Of
> > Justin Menga
> > Sent: Thursday, 5 December 2002 1:57 PM
> > To: 'Michael Jia'; security@xxxxxxxxxxxxxx
> > Subject: RE: Cat 6k IOS/CatOS
> >
> > Hi,
> >
> > You can order either....Yes, IPSec feature card
> requires native IOS
> >
> > Regards,
> > Justin
> >
> > -----Original Message-----
> > From: Michael Jia [mailto:mjia@xxxxxxxxx]
> > Sent: Thursday, December 05, 2002 3:50 PM
> > To: security@xxxxxxxxxxxxxx
> > Subject: Cat 6k IOS/CatOS
> >
> >
> > Hi,
> >
> > From Cisco WebSite, both IOS and CatOS are
> available as native CLI for
> Cat
> > 6000 series switch. Is this still true now, or
> Cisco is only shipping
> IOS
> > today.
> >
> > For the IPsec feature card to work, does it always
> requires the IOS
> based
> > Cat6k?
> >
> > Thanks
> > Michael
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
