Out of curiosity, I tried to install the JunOS 5 jinstall on FreeBSD 4.3.
This is the log I got until it failed due to missing previous install.
ANY PC will be recognized as an "olive" when the correct hardware is missing
(look at the messages after Bootstrap).
Log:
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 639kB/129984kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(builder@xxxxxxxxxxxxxxxxxx, Tue Aug 14 23:05:22 GMT 2001)
Loading /boot/defaults/loader.conf
/boot/installer text=0x1ba05e data=0x26bb4+0x21b84
syms=[0x4+0x2a190+0x4+0x2f85e]
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [installer]...
Copyright (c) 1996-2001, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 5.0R1.4 #0: 2001-08-14 23:09:02 UTC
builder@xxxxxxxxxxxxxxxxxx:/build/fafnir-b/5.0R1.4/src/sys/compile/MFS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff
real memory = 134152192 (131008K bytes)
sio0: gdb debugging port
avail memory = 123449344 (120556K bytes)
Olive CPU
Preloaded elf kernel "installer" at 0xc06e7000.
Preloaded md_image "/boot/mdimg" at 0xc06e70a0.
DEVFS: ready for devices
Pentium Pro MTRR support enabled
md0: Preloaded image 3704832 bytes at 0xc035d190
md1: Malloc disk
npx0: on motherboard
npx0: INT 16 interface
pcib0: on motherboard
pci0: on pcib0
pcib1: at device 1.0 on pci0
pci1: on pcib1
pci1: at 0.0 irq 11
isab0: at device 7.0 on pci0
isa0: on isab0
atapci0: port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: at 7.2 irq 10
smb0: port 0x5000-0x500f at device 7.3 on pci0
fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: on fdc0 drive 0
ata2 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: flags 0x1 irq 1 on atkbdc0
psm0: irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: at flags 0x100 on isa0
sc0: VGA
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: on ppbus0
lpt0: Interrupt-driven port
ppi0: on ppbus0
DEVFS: ready to run
ad0: 6180MB [13395/15/63] at ata0-master using UDMA33
acd0: CDROM at ata0-slave using PIO4
Mounting root from cd9660:/dev/md0c
Disabling watchdog
=================== Bootstrap installer starting ===================
Initialized the environment
Routing engine model is olive
Sourcing /sbin/olive
Discovered that flashdrive = , harddrive = wd0
ERROR: discover_install_drive: tmp/preinstall/install.conf not found
You are now in a debugging subshell (you may not see a prompt)...
#
// Johan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=9&i=591&t=563
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/juniper.html
