- A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: distance command for EIGRP [7:113679] posted 09/18/2006
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]

Think that the problem not in matching routes, main problem is to set
AD for E2 EIGRP-routes. Change AD possible only for all E2 routes. This not 
possible change AD per route or per origin or per tag for external EIGRP 

On Sunday 17 September 2006 12:24, Andrew Larkins wrote:
> Hi,
> Very do able.....under the route map just set the tag to a number and
> match at a later redistribution point
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
> Abel Aberra
> Sent: 17 September 2006 01:07 AM
> To: cisco@xxxxxxxxxxxxxx
> Subject: Re: distance command for EIGRP [7:113679]
> Is it possible to "tag" the external routes at the distribution point
> (because when the routes are redistributed from Static, BGP, OSPF, IGRP,
> etc... into EIGRP a route-map can be assigned to the redistribution
> statement to tag the routes) and then at some other point in the network
> change the distance with a route-map matching on the tag?
> Just throwing it out there... I know I'm a little rusty right now but I
> though I remembered doing something similar a long while back.
> Thx,
> -Abel
> On 9/16/06, Acer0001  wrote:
> > Ben -
> >
> > You are right. I kitted a config up for the situation you have stated
> > and I can't find a way to exclusively single out external routes. I
> > thought that maybe a route-map could be applied at the redistribution
> > point, but if I remember right, AS is assigned at the local router
> > only and not carried to other routers. I would agree that all routes
> > are changed with the distance eigrp command.
> >
> > I used 2811s with 12.4 adventerprise images.
> >
> > John
> The information contained in this message and or attachments is intended
> only for the person or entity to which it is addressed and may contain
> confidential and/or privileged material.  Any review, retransmission,
> dissemination or other use of, or taking of any action in reliance upon,
> this information by persons or entities other than the intended recipient
> is prohibited. If you received this in error, please contact the sender and
> delete the material from any system and destroy any copies.

Message Posted at:
FAQ, list archives, and subscription info: