You see the problem in the output of show version:
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
It says: Read ONLY.
In config mode do a conf reg 0x2101
Reboot, the router will bypass the config and will boot the "emergency" IOS
in ROM instead from flash, do another show version:
should be now in READ/WRITE.
tftp the new IOS onto the router, set the config-register back to 0x2102
with a "conf reg 0x2102" and reboot.
Old config should be active as well as the new IOS.
Regards,
Dirk.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=96593&t=95907
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
