 |
 |
|||||||||||||||||||
|
||||||||||||||||||||
|
Re: 3725 router>>>>>>>>>Help>>>>>DS3 [7:91463] posted 08/04/2004
|
See the following url for configuring a T3 card. The card is actually a T3/E3 card. You must set the card type to be either T3 or E3. Then the T3 controller will appear in the config. http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a008020eced.html Sample confug DS3 (T3) card configuration controller T3 3/0 clock source line cablelength 10 Serial port for DS3 (T3) card configuration and associated subinterface configuration interface Serial3/0 description WAN DS3 Frame CSU Port Speed 9216k bandwidth 9216 no ip address encapsulation frame-relay IETF logging event subif-link-status logging event dlci-status-change dsu bandwidth 44210 frame-relay traffic-shaping frame-relay lmi-type ansi ! interface Serial3/0.101 point-to-point description DLCI to S0/0.100 CIR=256k bandwidth 256 ip address 172.17.1.1 255.255.255.252 ip nbar protocol-discovery frame-relay interface-dlci 101 CISCO class FRTS-256kbps frame-relay ip rtp header-compression ! interface Serial3/0.102 point-to-point description DLCI to S0/0.101 CIR=768k bandwidth 768 ip address 172.17.1.5 255.255.255.252 ip nbar protocol-discovery frame-relay interface-dlci 102 CISCO class FRTS-768kbps frame-relay ip rtp header-compression ! David L. Blair wrote in message news:200408041102.i74B2EBC016097@xxxxxxxxxxxxxxxxx > I'm trying to set up a DS 3 on a 3725 router. I have a DS 3 card installed > but when I do a sh ver I do not see a S0 or E0 interface is this normal or > does this mean that the card is no showing and has a problem. If this is > normal > does anyone have a sample configuration for a DS 3 connection using HDLC. > > > Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=91464&t=91463 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
