Hi.. I found my PIX has no PDM installed. Show version result is as shown
below. I had
downloaded the PDM software image pdm-211.bin and plan to install it. I
also have my TFTP server
ready. Can I make sure whether I can just type the following command to
upgrade my PDM?? Is there
any other command that I need to type and anything that I need to do? Will
it prompt to reboot my
PIX?? Will my RAM or flash enough for the addtional PDM image? As it is my
production PIX. i
need want to make sure thing are fine.
pixfirewall# copy tftp://My_TFTP_Server_IP_Address/My_pdmfile_name flash:pdm
FW# sh ver
Cisco PIX Firewall Version 6.3(3)
Compiled on Wed 13-Aug-03 13:55 by morlee
FW up 2 days 11 hours
Hardware: PIX-515, 32 MB RAM, CPU Pentium 200 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
0: ethernet0: address is 0003.6bf6.7a43, irq 11
1: ethernet1: address is 0003.6bf6.7a44, irq 10
2: ethernet2: address is 0002.b3b2.47c8, irq 9
3: ethernet3: address is 00a0.c967.efa6, irq 7
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES-AES: Enabled
Maximum Physical Interfaces: 6
Maximum Interfaces: 10
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
This PIX has an Unrestricted (UR) license.
Serial Number: xxx
Running Activation Key: xxxx
Configuration last modified by enable_15 at 22:43:16.149 UTC Mon Aug 2 2004
_______________________________
Do you Yahoo!?
Express yourself with Y! Messenger! Free. Download now.
http://messenger.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=91403&t=91403
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
