GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: Strange port loss [7:84887] posted 02/27/2004
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


were any cables plugged into the ports in question?

thanks.
> I'm going to make a guess that in each case the four ports share a common
> chip in the hub/switch. If that is true, then if something fries one port
it
> takes out four. I don't believe that Cat5 has the same issues with
> electrical ground loops that coax has. Therefore I'm not too concerned
about
> the power to the PCs. This sounds like a layer one issue. So, I'd trace all
> four of the wires from switch to PC looking for frayed insulation and any
> possible source of electricity that might touch it. I'm thinking modular
> workspaces with wires running through channels in the components. I'm also
> thinking about wet floors and maybe in-floor electrical receptacles. The
> patch cord from the PC to its local network jack seems to always receive
the
> most abuse.
> Fridays seem to be a bad day. Do cleaning crews do anything special on
> certain days? Can you think of anything in the office that changed about
the
> time that the trouble started? Move of office components? New janitor? New

> large electrical feeds run adjacent to wiring?
> When you find the solution - this may be one for the ComputerWorld Daily
> Shark.
> 
> -----Original Message-----
> From: Steve Smith [mailto:ssmith@xxxxxxxxxxx] 
> Sent: Wednesday, February 25, 2004 9:06 AM
> To: cisco@xxxxxxxxxxxxxx
> Subject: Strange port loss [7:84887]
> 
> Hey gang has anyone seen this. I have a client who had a hub that "just
> quit working". They put in an old Boca hub and everything ran fine until
> the following Friday. Then 4 of the ports just locked up and went amber.
> Even if you unplugged the hub and plugged it back up it would not work
> on those ports. I went out and put in a Cisco Fast400 hub while while
> waiting for there switch to come in. The following Friday the Cisco hub
> lost 4 ports. 3 where amber and one was locked green. The hub will not
> do anything now but light up those ports. I replaced the hub with a Cat
> 2948 switch last Thursday. Monday they lost 4 ports again! They moved

> those 4 connections to different ports and they where able to continue
> working. On the switch, even after reboot, the 4 ports just flash amber
> and the switch shows them as faulty.
> 
> Does any have any idea what could be causing this to happen. The switch
> is plugged into a UPS.
> 
> thanks,
> 
> Steve Smith
> Enterprise Engineer
> **Please support GroupStudy by purchasing from the GroupStudy Store:
> http://shop.groupstudy.com
> FAQ, list archives, and subscription info: 
> http://www.groupstudy.com/list/cisco.html
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=85058&t=84887
--------------------------------------------------
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html