Dave C. wrote:
> The question that I have, is if I have 2 different versions of IOS loaded
on
> DISK0 (not SLOT0), will the following boot statement boot the new version
of
> IOS code, even though it references flash, and flash is referenced to
SLOT0.
>
> boot system flash c7200-js-mz.122-21a.bin
Try "boot sys flash disk0:c7200-js-mz.122-21a.bin"
Dave
>
> Currently the router does not have a boot statement since it only has one
> IOS image on DISK0. However with 2 images on DISK0(I don't want to delete
> the old image until the upgrade has been successful), I am not certain if
> the router will boot the correct image.
>
> If anyone has ran into this before, please let me know what you found.
> Thanks in advance for your help.
> **Please support GroupStudy by purchasing from the GroupStudy Store:
> http://shop.groupstudy.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
>
>
--
David Madland
CCIE #2016
Sr. Network Engineer
Qwest Communications Inc.
dmadlan@xxxxxxxxx
612-664-3367
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=83724&t=83721
--------------------------------------------------
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
