Clear config all on the sup module..
usually a session 15 gets to the L3 module from the
L2 mod...
Larry Letterman
Network Engineer
Cisco Systems
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx]On Behalf Of
> John Brandis
> Sent: Wednesday, April 09, 2003 11:13 PM
> To: cisco@xxxxxxxxxxxxxx
> Subject: cat 5505 [7:67194]
>
>
> Hi All,
>
> Just took delivery of an old cat 5505 with a little old sup3 as
> well in full
> working order. Have a question, well 2 actually.
>
> 1). How do you do the equivalent of write erase on the layer 2 module ??
>
>
>
> 2). How do you access the ;layer 2 module other than telnet from
> the layer 3
> module ? Why, because I wish to write erase the config of the guy
> that owned
> it before me so I can start fresh. Was this complicated in the past when
> working with a cat that had both a layer 2 and layer 3 module ???
>
> Any hints are appreciated
>
> John
> Sydney, Australia
>
>
> **********************************************************************
>
> This email message (and attachments) may contain information that is
> confidential to Solution 6. If you are not the intended recipient
> you cannot
> use, distribute or copy the message or attachments. In such a
> case, please
> notify the sender by return email immediately and erase all copies of the
> message and attachments. Opinions, conclusions and other information in
> this message and attachments that do not relate to the official
> business of
> Solution 6 are neither given nor endorsed by it.
>
> *********************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=67200&t=67194
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx
