GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: Silly EIGRP question [7:64259] posted 03/12/2003
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


resending.....
-----Original Message-----
From: Mustafa Furat 
Sent: Monday, March 10, 2003 7:21 PM
To: cisco@xxxxxxxxxxxxxx
Subject: RE: Silly EIGRP question [7:64259]


hi...

INET#sh version
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(7)T,  RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 08-Dec-99 01:53 by phanguye
Image text-base: 0x600088F0, data-base: 0x60E02000
.....



INET(config)#router eigrp 10
INET(config-router)#eigrp ?
  log-neighbor-changes   Enable/Disable IP-EIGRP neighbor logging
  log-neighbor-warnings  Enable/Disable IP-EIGRP neighbor warnings
  stub                   Set IP-EIGRP as stubed router





I still am not sure if it is for that purpose... but this is how it can
be configured...

Mustafa

-----Original Message-----
From: Amar KHELIFI [mailto:amarkhelifi@xxxxxxxxxxx]
Sent: Monday, March 10, 2003 2:48 AM
To: cisco@xxxxxxxxxxxxxx
Subject: Re: Silly EIGRP question [7:64259]


hi,
eigrp log-neighbor-changes
eigrp log-neighbor-warnings
Regards, Amar.
""Scott Roberts""  a icrit dans le message de news:
200303071743.RAA20868@xxxxxxxxxxxxxxxxx
> never heard of that command...doesn't exist to my knowledge (at least
on
> 12.0)
>
> scott
>
> ""Shyam, Sharma S (CAP, GECIS)""  wrote in
> message news:200303060145.BAA30904@xxxxxxxxxxxxxxxxx
> > Missed  the command
> >
> > show ip eigrp timers
> >
> > rgds
> >
> > > ----------
> > > From: Shyam, Sharma S (CAP, GECIS)
> > > Reply To: Shyam, Sharma S (CAP, GECIS)
> > > Sent: Thursday, March 06, 2003 6:33 AM
> > > To: cisco@xxxxxxxxxxxxxx
> > > Subject: RE: Silly EIGRP question [7:64259]
> > >
> > > Michael
> > >
> > > I am not much experiencd but can we use  for this.
> > >
> > > Rgds
> > > Sky
> > >
> > > > ----------
> > > > From: Michael Williams[SMTP:ccie2be@xxxxxxxxxx]
> > > > Reply To: Michael Williams
> > > > Sent: Tuesday, March 04, 2003 6:41 AM
> > > > To: cisco@xxxxxxxxxxxxxx
> > > > Subject: RE: Silly EIGRP question [7:64259]
> > > >
> > > > Priscilla Oppenheimer wrote:
> > > > > A protocol analyzer? ;-) And one that does a decent job with
> > > > > EIGRP. A lot of them don't. I think EtherPeek does in its
> > > > > latest software. Network Associates does a good job with
EIGRP.
> > > >
> > > > I'll span a the port connecting out WAN router to the core
switch
(I'm
> > 99%
> > > > sure we're getting hit with updates from the WAN).  We use NA,
but
> > haven't
> > > > had the need to use it for EIGRP..
> > > >
> > > > > You can turn the router into a troubleshooting tool with the
> > > > > various debug commands, of course. There's quite a few for
> > > > > EIGRP and at least one would give you the info that you seek,
> > > > > (probably debug eigrp packet). But, you didn't want to use
> > > > > debugging, for good reason probably.
> > > >
> > > > Yeah.... we don't take debugging on the core routers/switches to
> easily
> > =)
> > > > Ever since a new guy decided to debug EIGRP in an EIGRP storm
without
> a
> > "no
> > > > logging console".
> > > >
> > > > Thanks!
> > > > Mike




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65136&t=64259
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx