You need to change the speed first, then you can change the duplex. It has
to be in that order.
""SamN"" wrote in message
news:200302181718.RAA02898@xxxxxxxxxxxxxxxxx
> switch1> (enable) set port duplex 6/8 half
> Port 6/8 is in auto-sensing mode.
>
> The above switch is a 6500. AS i understand, the ports can be set to
> full,half or auto but when i try setting it to half, it doesn't allow me
to.
>
> thank you
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63279&t=63275
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx
