- A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
why I can't assign an ip address to virtual-TokenR [7:62007] posted 01/28/2003
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Now I take a test,The test Router is Cisco2611XM,I was upgraded the IOS.But
why I can't assign an ip address to virtual-TokenRing 0

test(config)#inter virtual-TokenRing 0
test(config-if)#ip add
test(config-if)#ip address 17
17:46:26: %LINK-3-UPDOWN: Interface Virtual-TokenRing0, changed state to up
17:46:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
Virtual-TokenRing0, ch
anged state to up
test(config-if)#ip address

% IP addresses may not be configured on a Virtual-TokenRing interface.


BTW,The show version as below.

test#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-DO3S-M), Version 12.1(14), RELEASE SOFTWARE 

Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 25-Mar-02 23:18 by kellythw
Image text-base: 0x80008088, data-base: 0x80E4DE34

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

test uptime is 17 hours, 49 minutes
System returned to ROM by power-on
System image file is "flash:c2600-do3s-mz.121-14.bin"

cisco 2611XM (MPC860) processor (revision 0x100) with 29696K/3072K bytes of 
Processor board ID xxxxxxxxxxxxxxx
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


Message Posted at:
FAQ, list archives, and subscription info:
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx