thanks
Craig Hyman
SRS Implementation Team
Tier 2 Support
craig.hyman@xxxxxxx
Broomfield Office 303-272-2661
Virtual Office Phone Number 303-604-0037
SkyPager Number 1-888-860-5913
-----Original Message-----
From: mjans001 [mailto:m.jansen001@xxxxxxxxx]
Sent: Thursday, January 23, 2003 2:03 PM
To: Hyman, Craig; cisco@xxxxxxxxxxxxxx
Subject: RE: Dynamic Natting [7:61584]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
For example:
Internet nat outside
E1 nat outside
Router 1600
E0 nat inside
Network inside
DG 10.x.99.100
Internal customers lans
ip nat inside source list 100 interface Ethernet1 overload
Nat list
access-list 100 permit ip 10.x.99.0 0.0.0.255 any
access-list 100 permit ip 10.x.100.0 0.0.0.255 any
access-list 100 permit ip 10.x.101.0 0.0.0.255 any
access-list 100 permit ip 10.x.102.0 0.0.0.255 any
Customer LANs
ip route 10.x.100.0 255.255.255.0 10.x.99.100
ip route 10.x.101.0 255.255.255.0 10.x.99.100
ip route 10.x.102.0 255.255.255.0 10.x.99.100
- -----Oorspronkelijk bericht-----
Van: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] Namens Hyman,
Craig
Verzonden: woensdag 22 januari 2003 17:13
Aan: cisco@xxxxxxxxxxxxxx
Onderwerp: Dynamic Natting [7:61584]
ALL-
Has anybody been able to do dynamic natting with a 1601R router using IOS
120221a?
Have you been able to use multiple subnets( customer IP;s) and run them
through one Nat address?
Craig Hyman
SRS Implementation Team
Tier 2 Support
craig.hyman@xxxxxxx
Broomfield Office 303-272-2661
Virtual Office Phone Number 303-604-0037
SkyPager Number 1-888-860-5913
- -----Original Message-----
From: Silju Pillai [mailto:nobody@xxxxxxxxxxxxxx]
Sent: Friday, August 02, 2002 3:40 PM
To: cisco@xxxxxxxxxxxxxx
Subject: RE: How to setup Pix site-to-site VPN with overlapping [7:50255]
HI David,
I have a link for you. It may help you a bit. It says NAT the existing
addresses to a different address at both sites (although the document says
one bcoz of the concentrator).
http://www.cisco.com/warp/public/707/vpn_pix_private.html.
If you are trying this ust tell me if it works or not.
regards
Silju
Version: PGP 8.0
iQA/AwUBPjBYdHdq56XWk+VyEQLpjgCbB3oFZ5RXaO+rXphAaFZIPQExc9MAoPWy
w00hZZlvoka9CV4zwuscI0By
=dOl9
-----END PGP SIGNATURE-----
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61779&t=61584
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx
