GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
SNMP Status: notPresent(6) [7:60633] posted 01/08/2003
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Hi all,

I have a 3662 router with four NM-1E2W modules. In each of those modules
is a WIC-1DSU integrated T1 CSU/DSU module, thus giving me Serial 1/0,
2/0, 3/0, and 4/0. All four of those T1s are up and operational, but I
have a SNMP management web page that's not showing them as being up
because SNMP is showing:

interfaces.ifTable.ifEntry.ifDescr.1 = Serial1/0
interfaces.ifTable.ifEntry.ifDescr.2 = Serial2/0
interfaces.ifTable.ifEntry.ifDescr.3 = Serial3/0
interfaces.ifTable.ifEntry.ifDescr.4 = Serial4/0
..
interfaces.ifTable.ifEntry.ifOperStatus.1 = notPresent(6)
interfaces.ifTable.ifEntry.ifOperStatus.2 = notPresent(6)
interfaces.ifTable.ifEntry.ifOperStatus.3 = notPresent(6)
interfaces.ifTable.ifEntry.ifOperStatus.4 = notPresent(6)

I can't figure out why their status would be "notPresent" when it should
be "up". I have a 3640 with the same integrated T1 modules that shows
"up" for the serial ports. Does anybody know what might be wrong?

Thanks,

James Willard
james@xxxxxxxxxxxxxx




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60633&t=60633
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx