- A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Packets received on wrong pvc [7:57509] posted 11/15/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]

I turned on some debugging and I am seeing this message in my log files. 
Does anyone know the cause or how to correct?

IP precedence 0 received on voice but should have been on data


Snips of the router config:

class-map match-all voip
  match access-group 100

policy-map llq
  class voip
    priority 80
   set ip dscp cs5
  class class-default
   set ip dscp default

vc-class atm vip
  vbr-rt 256 256 20
  precedence 5-7 
  no bump traffic
  no protect vc
  no protect group

vc-class atm normal
  vbr-nrt 192 192
  precedence 0-4 
  no protect vc
  no protect group

interface ATM0/0
 bandwidth 256
 ip address
 no atm ilmi-keepalive
 bundle qosmap
  protocol ip
  encapsulation aal5snap
  pvc-bundle voice 0/36 
   class-vc vip
   service-policy output llq
  pvc-bundle data 0/37 
   class-vc normal
   service-policy output llq
 dsl equipment-type CPE
 dsl operating-mode GSHDSL symmetric annex A
 dsl linerate AUTO

access-list 100 permit ip any any dscp cs5
access-list 100 permit ip any any precedence critical
access-list 100 permit tcp any any eq 1720
access-list 100 permit udp any any range 16383 16384

dial-peer voice 1 voip
 destination-pattern T
 session target ras
 ip qos dscp cs5 media
 ip qos dscp cs5 signaling

Router#sh debug
Generic ATM:
  ATM VC Bundle Events debugging is on
  ATM VC Bundle Errors debugging is on
  ATM VC Bundle INARP Events debugging is on
  ATM VC Bundle Adjacency Events debugging is on

Message Posted at:
FAQ, list archives, and subscription info:
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx