this setup is simple with two networks
with no address translations anywhere.
10.1.1.0/24 -------PIX------- 10.1.2.0/24
i have put in two access lists, one each for both
interfaces
access-list access_in permit ip any any
access-list access_out permit ip any any
access-group access_in in interface security0
access-group access_out in interface security100
provided the nat 0 command as well for both interfaces
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
nat (outside) 0 0.0.0.0 0.0.0.0 0 0
since there are no address translations etc there is
no static command given. right ?
i am having a problem with this set up. can someone
let me know what exactly is the problem here.
__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49800&t=49800
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx
