GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: Motorola router with Cisco router [7:49228] posted 07/19/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


try first without authentication, and if it came up then try to pap first at
both Cisco and Motorola router, if it works try chap if it didn't came up
make sure the MTU size at the Motorola router cause the default with Cisco
is 1500 make sure from MTU at the mot. router
regards
khalid


-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx]On Behalf Of
Sujal G. Ajmera
Sent: Friday, July 19, 2002 2:08 PM
To: cisco@xxxxxxxxxxxxxx
Subject: Motorola router with Cisco router [7:49228]


Hi,

I have ppp as the encapsulation protocol at both ends but the line protocol
doesn't come up.

I interchanged the Motorola router at the other end with a Cisco router and
line protocol came up.

Any thoughts on this?

Thanks,


Sujal

[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49230&t=49228
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx