GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: New 2600 and %Error opening tftp [7:48265] posted 07/07/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Phil Lorenz wrote:
> 
> %Error opening tftp://255.255.255.255/msb3100_v1_silver_c01
> (Timed out)
> 
> %Error opening tftp://255.255.255.255/msb3100_v1_silver_c01
> (Timed out)
> 
> %Error opening tftp://172.30.100.34/network-confg (Timed out)
> 
>  
> 
> Any idea where this crap-ola is coming from or what it is ???
> 
>  
> 
> I just pasted a config into a new 2611 and this appears @ the
> console
> every few minutes.
> 
>  
> 
> I disabled service config (2611# no service config)" but that
> did not
> change things.

Did you try 2611(config)# no service-config. In other words, make sure
you're in config mode when you enter the command.

That may be obvious, but sometimes we miss the obvious. ;-) The router
decides that it should try to go to a TFTP server after it SLARPs from
another router. This is very common in labs, for example. If your 2611 was
connected via a serial cross-over cable to another router that was already
configured, your router can SLARP. From then on it decides to try TFTP. It's
can be very annoying.

Priscilla Oppenheimer
http://www.priscilla.com
> 
>  
> 
> The running config does not contain any TFTP commands.
> 
>  
> 
> Any ideas ???
> 
>  
> 
> Thanks In Advance 
> 
> Phil
> 
> 




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=48289&t=48265
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx