GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: access-list 1 permit 0.0.0.0 in route-map question [7:41867] posted 04/18/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


This is permiting 0.0.0.0 only, remember the default mask is 0.0.0.0,
exact match.
  Dave

Ruihai An wrote:
> 
> Group,
> 
> I have seen this "access-list 1 permit 0.0.0.0" with route-map a couple of
> times and had trouble to find a definite answer.  Some place on Cisco web
> site say this is permit EVERYTHING, some place says permit NOTHING.  Can
> anyone explain this?
> 
> Thanks
> 
> Ruihai
> 
> router bgp 3
>  redistribute ospf 2 match internal external 1 external 2 route-map filter1
> 
> access-list 1 permit 0.0.0.0
> access-list 2 permit any
> !
> route-map filter1 deny 10
>  match ip address 1
> !
> route-map filter1 permit 20
>  match ip address 2
> !
-- 
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
dave@xxxxxxxxxxxxxx
612-664-3367

"Emotion should reflect reason not guide it"




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41867&t=41867
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx