Something like this on a router:
int fa0/1
channel-group 24
int fa0/2
channel-group 24
int port-channel 24
ip add 10.1.1.1
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/inte
r_c/icdlanin.htm#xtocid1703911
On the 4000 and 6000 series it can be done like this:
set port channel 1/1-2 35
set port channel 2/1-2,3/1-2,4/1-2,5/1-2 164
David C Prall dcp@xxxxxxxxxxx http://dcp.dcptech.com
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx]On Behalf Of
> Jeffrey Reed
> Sent: Friday, April 12, 2002 9:54 AM
> To: cisco@xxxxxxxxxxxxxx
> Subject: Set Channel_id? [7:41303]
>
>
> Is there a way to set the channel_id number for port channels? I see a lot
> of commands reference the channel_id, but I dont see a way to
> configure the
> ID number.
>
> Thanks!
>
> Jeffrey Reed
> Classic Networking, Inc.
> Cell 717-805-5536
> Office 717-737-8586
> FAX 717-737-0290
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41341&t=41303
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx
