GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: Problem to configure IS-IS [7:41138] posted 04/11/2002
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


CLNS is not need for IS-IS routing for IP

At 03:03 PM 4/11/2002 -0400, you wrote:
>Did you enable CLNS routing? You need to turn this on before you can
>configure ISIS.
>
>Anthony Pace
>
>
>""nntp.groupstudy.com""  wrote in message
>news:200204110201.WAA13412@xxxxxxxxxxxxxxxxx
> > Hi, Group,
> >
> > I am trying to configure IS-IS at CCIE lab, and two of my router did not
> > allow
> > me to get into the IS-IS router mode.  I wonder if anyone can tell me
what
> > the
> > problem is.  See following router output:
> >
> > Thanks
> >
> > Ruihai
> >
> > IOS (tm) C2600 Software (C2600-DS-M), Version 12.1(13), RELEASE SOFTWARE
> > (fc3)
> > System image file is "flash:c2600-ds-mz.121-13.bin"
> >
> > cisco 2610 (MPC860) processor (revision 0x202) with 39936K/9216K bytes of
> > memory
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41224&t=41138
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@xxxxxxxxxxxxxx