GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: unable to ping near side of frame relay device posted 03/24/1999
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


u need a frame-relay map statement mapping to your own
s0 address in order to ping it.

do a sh frame map, if u don't see the address there, u can't ping
it.

HTH
Eng Wee


>From: mstan@xxxxxxxxx (Mark A. Stanfill)
>Reply-To: mstan@xxxxxxxxx (Mark A. Stanfill)
>To: cisco@xxxxxxxxxxxxxx
>Subject: unable to ping near side of frame relay device
>Date: Wed, 24 Mar 1999 05:46:44 GMT
>
>I have set up a *very* basic FR simulation, using two 25XX
>routers linked back-to-back via the serial ports.  PPP and HDLC
>encapsulation work as expected for IP and IPX.
>
>When I set up frame-relay encapsulation, I am able to see the
>rest of the network, except for the near side of the frame relay
>interface on the router itself.  Machines connected via ethernet
>can see both serial interface's IP and IPX addresses.  
>
>Is this normal behaviour for frame relay (I don't have access to
>an active FR switch at this point)?  
>
>
>Relevant information:
>
>R1
>192.168.1.1---e0----S0 192.168.99.1
>                          |
>                          | DLCI 16
>                          |   
>                    S0 192.168.99.2---e0---192.168.2.1
>                             R2
>
>On R1, I can ping R1.e0, R2.e0, R2.s0
>On R2, I can ping R2.e0, R1.e0, R1.s0
>
>
>*************
>
>R1
>!
>frame-relay switching
>!
>interface Serial0
> ip address 192.168.99.1 255.255.255.0
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> ipx network 100
> no fair-queue
> clockrate 56000
> frame-relay map ip 192.168.99.2 16 broadcast
> frame-relay interface-dlci 16
> frame-relay intf-type dce
>
>
>****************
>
>R2
>!
>interface Serial0
> ip address 192.168.99.2 255.255.255.0
> encapsulation frame-relay
> bandwidth 56000
> ipx network 100
> frame-relay interface-dlci 16
>
>                   
>Mark A. Stanfill
>MCP+I, MCSE
>mstan@xxxxxxxxx
>---------------------
>To remove your name from the mailing list send a message to 
Majordomo@xxxxxxxxxxxxxx with the body containing "UNSUBSCRIBE CISCO"

Get Your Private, Free Email at http://www.hotmail.com
---------------------
To remove your name from the mailing list send a message to Majordomo@xxxxxxxxxxxxxx with the body containing "UNSUBSCRIBE CISCO"