GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
problem with VIC-4FXS/DID voice card posted 11/04/2008
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Dear All,


I need your support. i am facing problem with VIC-4FXS/DID card. I have
cisco 3745. We have used NM-HD1V and insert VIC-4FXS/DID in that. It is
showing NH-HD1V but is it not detecting VIC-4FXS/DID card. I have upgraded
the IOS version also.

Below is the sh diag output ,


Router# sh diag

 Slot 4:

       Unknown (type 922) Port adapter

        Port adapter is disabled deactivated

        Port adapter insertion time unknown

        EEPROM contents at hardware discovery:

        Hardware Revision        : 5.3

        Top Assy. Part Number    : 800-21590-02

        Board Revision           : B0

        Deviation Number         : 0-0

        Fab Version              : 03

        PCB Serial Number        : FOC11455E1U

        RMA Test History         : 00

        RMA Number               : 0-0-0-0

        RMA History              : 00

        Product (FRU) Number     : NM-HD-1V

        Version Identifier (VID) : V01

        EEPROM format version 4

        EEPROM contents (hex):

          0x00: 04 FF 40 03 9A 41 05 03 C0 46 03 20 00 54 56 02

          0x10: 42 42 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 31

          0x20: 31 34 35 35 45 31 55 03 00 81 00 00 00 00 04 00

          0x30: CB 88 4E 4D 2D 48 44 2D 31 56 89 56 30 31 20 FF

          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF



Thanks

Hemant