I heard they had to turn Scott away from the door because he was
wearing a juniper shirt. Is this true Scott?
;)
Brian McGahan, CCIE #8593 (R&S/SP/Security)
bmcgahan@xxxxxxxxxxxxxxxxxxxxxx
Internetwork Expert, Inc.
http://www.internetworkexpert.com
On Jun 25, 2008, at 8:58 AM, "Luan M Nguyen" <luan@xxxxxxxxxxxxxxxx>
wrote:
so Scott was/is not wasted at the CCIE party? what kind of party is
THAT?
:P
Maybe I should read the response first? :)
-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf
Of
Scott Morris
Sent: Wednesday, June 25, 2008 8:35 AM
To: 'Almog Ohayon'; ccielab@xxxxxxxxxxxxxx
Subject: RE: Real Lab Exam Questions
1. Do what you are asked, and if something else is required to make
that
work, do it. If not, leave it alone.
2. There should be technical similarities but not duplication. Don't
concentrate on which lab is "most like" the real one because even if
there
is one, the CCIE folks will change that anyway! Always aim higher.
3. Depends on whether it bothers anything. If you end up with any
magical
connectivity between your spokes I'd say it's a problem. But
otherwise you
may not care. Watch your lab!
4. Whenever a packet moves through a network you have an obvious
entry
point and exit point. Everything in between is a transit device.
5. When you see things not working correctly. :) In other words,
answer
by asking yourself "What does 'next-hop-self' accomplish for me?".
Knowing
that will help answer the question there.
Cheers,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
JNCIE-M
#153, JNCIS-ER, MCSE, CCDP, CCNA-WAN Switching, CCSP, Cable
Communications
Specialist, IP Telephony Support Specialist, IP Telephony Design
Specialist,
CISSP
CCSI #21903, JNCI-M, JNCI-ER
swm@xxxxxxxxxx
-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf
Of
Almog Ohayon
Sent: Wednesday, June 25, 2008 6:49 AM
To: ccielab@xxxxxxxxxxxxxx
Subject: Real Lab Exam Questions
Hi Everyone,
i have couple of questions for the real lab exam :
1. if in the start of the lab all the trunks are up and the bridging
and
switching tasks tell me to configure some of trunks - what to do
with the
rest of the trunks ??
2. how similar is the real ccie lab exam to internetworkexpert
Version 4
labs or ipexpert version 9 labs ?
3. if in the tasks frame relay inverse arp is not asked - should i
need to
configure it ??
4. what does it mean speaking devices , transit devices which
routers to
refer ??
5. there is no consistent configuration in my training labs
(Internetworkexpert v4) of bgp next-hop-self - when exactly do i
need to
configure it ??
--
Best ,
Almog Ohayon.
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html