GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: Basic privilege issue posted 01/04/2008
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Hi Brian,

In my case he can do "sh run" but sees a blank config because there are no
config commands available at privilege level 7 or below.

I'm a bit confused with privilege levels 0 and 1. Aren't both referring to
Router> prompt?


Thank you.

BR,
Emil


On 1/5/08, Brian Dennis <bdennis@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> The user is seeing all level 7 configuration commands ;-)
>
> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> bdennis@xxxxxxxxxxxxxxxxxxxxxx
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> >----- Original Message -----
> Subject: Basic privilege issue
> Date: Fri, January 4, 2008 7:43
> From: "YourPal" <dearprudence28@xxxxxxxxx>
>
> > Hi Group,
> >
> > I have a basic problem but can't seem to figure out why. Hope someone
> > can explain it to me. Router config as follows:
> > !
> > username test privilege 7 password 0 test
> > !
> > privilege exec level 7 show running-config
> > !
> > line vty 0 4
> >  login local
> > !
> >
> > When user "test" telnets in and issues the command "sh run", he sees a
> blank
> > config. Why is it so? I'd like him to be able to view the config.
> >
> >
> > Thank you.
> >
> > BR,
> > Emil
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html