GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: no frame-relay adaptive-shaping posted 12/02/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Mohammad,
                   I would suggest that you read up on the concept. It
is very important that you understand the concept as the question can
be directed  from any direction.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ft_afrts.htm

Few things to keep in mind are:

is the VC running Voice over it, if yes, you really do not want
adaptive shaping enabled.

If the configured CIR within the frame relay map class is the same as
the true CIR of the PVC, there is no need to throttle down traffic due
to BECNs. If CIR is not exceeded, BECNs are not generated.

when using Adapting shaping in the worst case scenario you are
dropping the packets at the VC queue level rather than the interface
level.
HTH,
Tarun
On Dec 2, 2007 10:02 AM, Mohammad Tawfiq Dawod <www.engineer@xxxxxxxxx> wrote:
> OK Carlos,
>
> But if the task did not metntion anything about BECN ..? I mean is not it "
> no fram adpative-shaping"  the default?
>
>
>
> On 12/2/07, Carlos Trujillo Jimenez <nergal888@xxxxxxxxxxx> wrote:
> >
> > Depends, If the task IS ASKING OR NOT to do it..
> > if you have adaptive shaping becn enabled, when the frame-relay network
> > experiences congestion it sends back to the router becn packets in one
> > side
> > and fecn packets at the other side.
> > So when the router recibes becn or fecn packets, and if it is configured
> > to
> > adapt for the congestion it reduces the configured cir value to the mincir
> > value.
> >
> >
> >
> >
> > >From: "Mohammad Tawfiq Dawod" <www.engineer@xxxxxxxxx>
> > >Return-Path: ccielab-owner@xxxxxxxxxxxxxx
> > >X-OriginalArrivalTime: 02 Dec 2007 14:49:24.0614 (UTC)
> > >FILETIME=[87DC2260:01C834F2]
> > >
> > >When configuring frame-relay map-class like the below one; is it
> > necessary
> > >that I configure "no frame-relay adaptive-shaping".
> > >
> > >The below example is from cisco.com
> > >*
> > >
> > >map-class frame-relay fr-voip
> > >
> > >frame-relay cir 800000
> > >*
> > >
> > >frame-relay bc 8000
> > >
> > >frame-relay mincir 128000
> > >*
> > >
> > >frame-relay fragment 280
> > >*
> > >
> > >no frame-relay adaptive-shaping
> > >*
> > >
> > >frame-relay fair-queue*
> > >
> > >
> > >--
> > >Best Regards,
> > >Mohammad
> > >
> > >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _________________________________________________________________
> > Las mejores tiendas, los precios mas bajos, entregas en todo el mundo,
> > YupiMSN Compras: http://latam.msn.com/compras/
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
>
> Best Regards,
> Mohammad
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html