GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: doccd question posted 11/01/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


If everyone gets use to the command line, and the feel for where things are,
IOS can be mastered. It took me less then an hour to get acquainted with IOS
XR, and everything is in a different place. I still like J's space
completion though.

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On 
> Behalf Of Scott Vermillion
> Sent: Thursday, November 01, 2007 8:37 PM
> To: 'David Prall'; 'George Goglidze'; 'Cisco certification'
> Subject: RE: doccd question
> 
> Hi David,
> 
> Well, to put it in Joe Brunner parlance, that's why you're a 
> three-star (or
> is it four by now?) general and I'm still a private!
> 
> Thanks much,
> 
> Scott
> 
> -----Original Message-----
> From: David Prall [mailto:dcp@xxxxxxxxxxx] 
> Sent: Thursday, November 01, 2007 6:11 PM
> To: 'Scott Vermillion'; 'George Goglidze'; 'Cisco certification'
> Subject: RE: doccd question
> 
> Hell,
> conf t
> access-list 100 permit ?
>   <0-255>  An IP protocol number
>   ahp      Authentication Header Protocol
>   eigrp    Cisco's EIGRP routing protocol
>   esp      Encapsulation Security Payload
>   gre      Cisco's GRE tunneling
>   icmp     Internet Control Message Protocol
>   igmp     Internet Gateway Message Protocol
>   ip       Any Internet Protocol
>   ipinip   IP in IP tunneling
>   nos      KA9Q NOS compatible IP over IP tunneling
>   ospf     OSPF routing protocol
>   pcp      Payload Compression Protocol
>   pim      Protocol Independent Multicast
>   tcp      Transmission Control Protocol
>   udp      User Datagram Protocol
> 
> 
> Put the number in and see what "sh access-list 100" displays. 
> If you are
> guessing and sort of have a clue you will be very good to go.
> 
> David
> 
> --
> http://dcp.dcptech.com
>   
> 
> > -----Original Message-----
> > From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On 
> > Behalf Of Scott Vermillion
> > Sent: Thursday, November 01, 2007 7:55 PM
> > To: 'George Goglidze'; 'Cisco certification'
> > Subject: RE: doccd question
> > 
> > I've seen links posted here several times but save yourself a 
> > few seconds
> > and do it from the command line:
> > 
> > 'sh ip port-map' (fairly extensive list) or 'sh ip port-map 
> > telnet' or 'sh
> > ip port-map | inc blah'
> > 
> > I don't think that this works for any IP protocols.  In other 
> > words, if you
> > try to do a 'sh ip port-map esp' it isn't going to work, as 
> > this isn't a
> > port number but rather a protocol number.  If you needed to 
> > know that, I
> > guess you'd still have to go to the DocCD.  But if it was a 
> > port number I
> > was after, I'd try this approach first.    
> > 
> > -----Original Message-----
> > From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On 
> > Behalf Of
> > George Goglidze
> > Sent: Thursday, November 01, 2007 4:48 PM
> > To: Cisco certification
> > Subject: doccd question
> > 
> > Hi all,
> > 
> > Can anyone tell me please, if you know where on DOCCD can I 
> > find information
> > about application ports.
> > for example, ports like telnet, ftp and many other that are 
> > not well known.
> > 
> > Many thanks,
> > 
> > ______________________________________________________________
> > _________
> > Subscription information may be found at: 
> > http://www.groupstudy.com/list/CCIELab.html
> > 
> > ______________________________________________________________
> > _________
> > Subscription information may be found at: 
> > http://www.groupstudy.com/list/CCIELab.html
> 
> ______________________________________________________________
> _________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html