GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: default multicast pim mode posted 10/01/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


There is no default mode for pim. Now the choice you make depends on the
tasks, if there is an RP you will need sparse mode but if there are not RPs
defined you will need dense mode. If you enable sparse-dense it will use
sparse for the groups that have RP defined and dense for the ones that not.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/iprmc_r/ip3_i2g.htm#wp1080424

Regards
-Saul