GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Fwd: IOS not taking rmon events command, when there is spaces between words? posted 08/30/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


---------- Forwarded message ----------
From: nicky noname <cisco2study@xxxxxxxxx>
Date: Aug 29, 2007 3:59 PM
Subject: IOS not taking rmon events command, when there is spaces between
words?
To: Cisco certification <ccielab@xxxxxxxxxxxxxx>

Hi,

I am loosing it a bit.....with rmon that is. I thought I had this well
understood......but I just completed a mock lab and the IOS  would not allow
me to enter in rmon events with descriptions that had spaces in between the
words. The exact lines are below.

Can someone please set me straight on this...I'm sure it very simple. I had
to use an underscore between the words...am sure there are no marks here!

This is what I tried
mon event 1 log description "One Minute CPU Average Rising Above 80%" owner
config
rmon event 2 log description "One Minute CPU Average Back Below 40%" owner
config
rmon alarm 1 lsystem.57.0 15 absolute rising-threshold 80 1
falling-threshold 40 2 owner config

........But this is all that the IOS would accept .......
rmon event 1 log description One_Minute_CPU_Average_Rising_Above_80% owner
config
rmon event 2 log description One_Minute_CPU_Average_Back_Below_40% owner
config
rmon alarm 1 lsystem.57.0 15 absolute rising-threshold 80 1
falling-threshold 40 2 owner config

Also....I think I have the solution wrong in how i specified the
percentages. They should be 80% and 40%, as u can see above........but the
alarm doesn't indicate a percentage input?

Thanks again