GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: OSPF Issue with Distance posted 08/13/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Check R1's OSPF RouterId. Remember that you need to use the RouterId in the
Distance command.


Regards,

Antonio Soares
CCIE #18473, CCNP, CCIP

-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
Julio Carrasco
Sent: segunda-feira, 13 de Agosto de 2007 13:24
To: ccielab@xxxxxxxxxxxxxx
Subject: OSPF Issue with Distance

Hi Group,

I am trying to configure r5 to change the ospf distnce for some routes
learnt from router 1 (139.3.15.1) to 109.
The config I have is:

router ospf 1
 log-adjacency-changes
 redistribute rip subnets
 network 139.3.15.5 0.0.0.0 area 1
 neighbor 139.3.15.2
 neighbor 139.3.15.1
 distance 109 139.3.15.1 0.0.0.0 OSPF
!
ip access-list standard OSPF
 permit 139.3.2.0 0.0.0.255
 permit 139.3.6.0 0.0.0.255
 permit 139.3.7.0 0.0.0.255
 permit 139.3.11.0 0.0.0.255
 permit 139.3.0.0 0.0.0.255
!

but When i do a show ip route, I have this:

O IA    139.3.6.0 [110/130] via 139.3.15.2, 00:30:47, Serial0/0/0
                  [110/130] via 139.3.15.1, 00:30:47, Serial0/0/0
O IA    139.3.7.0 [110/130] via 139.3.15.2, 00:30:47, Serial0/0/0
                  [110/130] via 139.3.15.1, 00:30:47, Serial0/0/0

Do anyone know why networks 139.3.6.0 and 139.3.7.0 remains with distance
110 ??

I am sure, I am missing something or I am doing something stupid, fut I
can4t find out what is.

TIA,
Julio.

_______________________________________________________________________
Subscription information may be found at: 
http://www.groupstudy.com/list/CCIELab.html