GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: RE: RMON Trap posted 08/02/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Hi Victor,

But what about the RMON traps? See the config below (this is from an IE lab):

rmon alarm 1 ifEntry.11.1 60 delta rising-threshold 15000 1 falling-threshold 5000 2
rmon event 1 trap IETRAP description "Above 15000 for ifInUcastPkts"
rmon event 2 trap IETRAP description "Below 5000 for ifInUcastPkts"
snmp-server host 1.1.1.1 IETRAP

In order to send the rmon traps, is this configuration enough ? or should I enable the snmp traps ? 
Some IE Solutions consider the swnmp-server enable traps command.

TIA /// Neirival





----- Original Message -----
From: Victor Cappuccio <vcappuccio@xxxxxxxxxxxxxx>
Date: Thursday, August 2, 2007 5:50 pm
Subject: RE: RMON Trap

> Neirival,
> 
> 
> snmp-server host 16.16.6.6 NLIRULEZ!
> Enables all traps will  sent to the snmp server with NLIRULEZ! as 
> community
> how ever we need to to enable traps to be sent to that Managment 
> Stationusing the snmp-server enable traps command
> 
> BB1#conf ter
> Enter configuration commands, one per line.  End with CNTL/Z.
> BB1(config)#snmp-server enable traps
> % Cannot enable both sham-link state-change interface traps.
> % New sham link interface trap not enabled.
> BB1(config)#do show run | in snmp
> snmp-server enable traps snmp authentication linkdown linkup coldstart
> warmstart
> snmp-server enable traps vrrp
> snmp-server enable traps ds1
> snmp-server enable traps tty
> snmp-server enable traps eigrp
> snmp-server enable traps xgcp
> snmp-server enable traps flash insertion removal
> snmp-server enable traps ds3
> snmp-server enable traps envmon
> snmp-server enable traps icsudsu
> snmp-server enable traps isdn call-information
> snmp-server enable traps isdn layer2
> snmp-server enable traps isdn chan-not-avail
> snmp-server enable traps isdn ietf
> snmp-server enable traps ds0-busyout
> snmp-server enable traps ds1-loopback
> snmp-server enable traps atm subif
> snmp-server enable traps bgp
> snmp-server enable traps bstun
> snmp-server enable traps bulkstat collection transfer
> snmp-server enable traps cnpd
> snmp-server enable traps config-copy
> snmp-server enable traps config
> BB1(config)#!AND MORE!!
> 
> so to limit a specific trap to be sent to that host
> 
> snmp-server host 16.16.6.6 NLIRULEZ! bgp
> 
> Now only bgp traps are sent
> 
> 
> HTH
> thanks,
> Victor Cappuccio.-
> - CCSI# 31452
> 
> CCBOOTCAMP - A Cisco Sponsored Organization (SO)
> email: vcappuccio@xxxxxxxxxxxxxx
> Toll Free: 877-654-2243
> Direct: +1-702-968-5100 = Outside the USA
> FAX: +1-702-446-8012
> YES! We take Cisco Learning Credits!
> Training And Remote Racks: http://www.ccbootcamp.com
> 
> Register to win a free iPhone! http://www.ccbootcamp.com/iphone.html
> 
> 
> 
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx on behalf of neirival@xxxxxxxxxxxxx
> Sent: Thu 02-Aug-07 1:34 PM
> To: ccielab@xxxxxxxxxxxxxx
> Subject: RMON Trap
> 
> Hi all,
> 
> When configuring RMON to send snmp traps should I use the command "#
> snmp-server enable traps" beyond the "# snmp-server host 1.1.1.1 
> CISCOTRAP",or it's not needed ?
> 
> Some IE labs use this command and some not.
> 
> regards /// Neirival
> 
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
> 
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email 
> ______________________________________________________________________