hi all
here;s my scenario
SW1 has a host on vlan 10 and SVI vlan 10 with ip add 10.1.1.1/24.
the host is set to choose ip address automatically from dhcp server.
i have ios router as dhcp server on vlan 20
SVI vlan 20 has ip add 20.1.1.1 and dhcp server as 20.1.1.2
on the SVI of vlan 10 i have set the helper-address to 20.1.1.2 of the
dhcp
server.
my hosts are getting the ip address from the server .
my doubt is since in the switch we can only specify the helpder-address
command .
it means all the broadcast on the vlan 10 will be converted and send as a
unicast packet to the dhcp server also .
how can i control it say only the dhcp broadcast packets should be
converted
to unicast and send to the dhcp server.
no other other broadcast should be unicast and send to the dhcp server.
is this possible
has anyone tried this before.
waiting for some reply.
regards
sebastan
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
