GroupStudy.com GroupStudy.com - A virtual community of network engineers
Home BookStore StudyNotes Links Archives StudyRooms HelpWanted Discounts Login
EIGRP Neighbor statement over Frame Relay posted 03/06/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next] 
R2, R5, R6 are connected over Frame Relay Cloud. I have broadcast turned on,
but I can't get them peer with each other without EIGRP neighbor statement.
Any idea why?

R2
Serial0/0/0.256 (up): ip 150.50.100.5 dlci 205(0xCD,0x30D0), static,
              broadcast,
              CISCO, status defined, active
Serial0/0/0.256 (up): ip 150.50.100.6 dlci 206(0xCE,0x30E0), static,
              broadcast,
              CISCO, status defined, active

R5
Serial0/0/0 (up): ip 150.50.100.2 dlci 502(0x1F6,0x7C60), static,
              broadcast,
              CISCO, status defined, active
Serial0/0/0 (up): ip 150.50.100.6 dlci 502(0x1F6,0x7C60), static,
              broadcast,
              CISCO, status defined, active

R6
Serial0/0/0 (up): ip 150.50.100.2 dlci 602(0x25A,0x94A0), static,
              broadcast,
              CISCO, status defined, active
Serial0/0/0 (up): ip 150.50.100.5 dlci 602(0x25A,0x94A0), static,
              broadcast,
              CISCO, status defined, activ