All:
I am working on a spread sheet to figure this out.
But this is how I believe it works from reading all the other posts. Let me
give this a try (correct me where I am off):
If you do not specify a Bc value, then you can the find Tc value.
In this thread, CIR is 320k and Bc is 8k
So:
Tc = Bc/CIR
Tc = 8000/320000
.025 is your Tc value.
If you do not specify the Bc value then the system must use the defaults:
With Bc = 0
CIR/AR is less than and NOT equal to 640k then your tc will be .125
CIR/AR is between 640k-768k and NOT equal to 640k and 768 then your Tc will be
1/2 the previous (rounded up) or .063ms
CIR/AR is between 768k-1024k and NOT equal to 768k - 1536k then your Tc will be
1/2 the previous threshold or .032ms
CIR/AR > 1536 you are in the .016ms range.
Briefly:
All ms are rounded up.
AR/CIR <!= 640k Tc = .125 (1/8 of 1 Second)
AR/CIR >!= 640k But AR/CIR <!= 768k Tc = .063 (1/16 of a Second)
AR/CIR >!= 768k But AR/CIR <!= 1024k Tc = .032 (1/32 of a second)
AR/CIR >!= 1024k but AR/CIR <!= 1536k Tc = .016 (1/64 of a Second)
If you do specify a Bc value you must solve for Tc, then you can solve for the
Bite Limit and Increment.
Bite Limit = (CIR*Tc)/8
If you are missing any of the values you can solve for any of the others. When I
have the data verified I'll send it out.
DMT
-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of Gary
Braver
Sent: Sunday, February 11, 2007 5:02 PM
To: mariam.tatevik@xxxxxxxxx; ccielab@xxxxxxxxxxxxxx
Subject: RE: to verify Tc
My understanding of CB shaping defaults
Rate <= 320 kbps
Bc 8000 bits
Be = Bc = 8000
Tc = Bc/shaping rate
Rate > 320 kbps
Bc = shaping rate * Tc
Be = Bc
TC = 25 ms
I too thought FRTS defaulted to Tc=125ms
-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
mariam.tatevik@xxxxxxxxx
Sent: Saturday, February 10, 2007 10:20 AM
To: ccielab@xxxxxxxxxxxxxx
Subject: to verify Tc
Hello GS
just want to verify all default Tc values:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! police Tc = 250ms => bc = cir/32
! shape Tc = 25ms for CIR > 320kbps
! shape Tc = Bc/CIR for CIR <= 320Kbps
! priority [burst] Tc = 200ms
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! FRTS Tc = 125ms
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is the above list correct ?
THX
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
THE INFORMATION TRANSMITTED IN THIS ELECTRONIC COMMUNICATION IS INTENDED ONLY FOR THE PERSON OR ENTITY TO WHOM IT IS ADDRESSED AND MAY CONTAIN CONFIDENTIAL AND/OR PRIVILEGED MATERIAL. ANY REVIEW, RETRANSMISSION, DISSEMINATION OR OTHER USE OF OR TAKING OF ANY ACTION IN RELIANCE UPON, THIS INFORMATION BY PERSONS OR ENTITIES OTHER THAN THE INTENDED RECIPIENT IS PROHIBITED. IF YOU RECEIVED THIS INFORMATION IN ERROR, PLEASE CONTACT THE SENDER AND THE PRIVACY OFFICER, AND PROPERLY DISPOSE OF THIS INFORMATION.
