The default Tc value is dependant upon the CIR configured.
http://www.internetworkexpert.com/configs/other/frts_tc.htm
--
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@xxxxxxxxxxxxxxxxxxxxxx
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
On 2/11/07 2:02 PM, "Gary Braver" <gbraver@xxxxxxxxxxxxxxxxxxxx> wrote:
> My understanding of CB shaping defaults
> Rate <= 320 kbps
> Bc 8000 bits
> Be = Bc = 8000
> Tc = Bc/shaping rate
>
> Rate > 320 kbps
> Bc = shaping rate * Tc
> Be = Bc
> TC = 25 ms
>
> I too thought FRTS defaulted to Tc=125ms
>
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
> mariam.tatevik@xxxxxxxxx
> Sent: Saturday, February 10, 2007 10:20 AM
> To: ccielab@xxxxxxxxxxxxxx
> Subject: to verify Tc
>
> Hello GS
>
> just want to verify all default Tc values:
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> ! police Tc = 250ms => bc = cir/32
> ! shape Tc = 25ms for CIR > 320kbps
> ! shape Tc = Bc/CIR for CIR <= 320Kbps
> ! priority [burst] Tc = 200ms
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> ! FRTS Tc = 125ms
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>
> Is the above list correct ?
>
> THX
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
