GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: privilege level question posted 02/04/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Indeed,
Tnks,
L.

-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
Edison Ortiz
Sent: 04 February 2007 16:17
To: BitGossip; ccielab@xxxxxxxxxxxxxx
Subject: Re: privilege level question

You need to enable the suboptions.

Try

privilege interface all level 10 ip address

----- Original Message ----- 
From: "BitGossip" <bit.gossip@xxxxxxxxx>
To: <ccielab@xxxxxxxxxxxxxx>
Sent: Sunday, February 04, 2007 9:34 AM
Subject: privilege level question


> Hi Group,
> My task asks to modify 'privilege level 10' so that it allows modifying 
> the
> ip address of interface.
>
> I think I have done it and it works for the primary address.
> The problem is that it doesn't allow me to add/del/modify a secondary
> address.
> Any idea how to achieve that as well?
> Thank,
> Luca.
>
>
> privilege interface level 10 ip address
> privilege interface level 10 ip
> privilege configure level 10 interface
> privilege exec level 10 configure terminal
> privilege exec level 10 configure
>
>
> From another session with enable 10:
>
> r6(config-if)#ip address 1.1.1.1 255.255.255.0
>
> r6(config-if)#ip address 2.2.2.2 255.255.255.0 ?
>  <cr>
>
> r6(config-if)#ip address 2.2.2.2 255.255.255.0 secondary
>                                               ^
> % Invalid input detected at '^' marker.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html 

_______________________________________________________________________
Subscription information may be found at: 
http://www.groupstudy.com/list/CCIELab.html