GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: rtr reaction-config OR reaction-trigger posted 02/02/2007
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Hi Everybody,

Thank you very much and I appreciate very much your response. So, it
looks like that if rtr Operation return code is Time out, there is no
way to configure reaction-configuration or reaction-trigger that
router shall shut one of its interface down?

Regards,

Mohammad Zahed Saeed

On 2/2/07, yan_zhg <yan_zhg@xxxxxxx> wrote:


you need a new ios version,below is some configuration i have done on our
Cisco7206,the ios version i used is 12.4



ip route 30.1.1.0 255.255.255.0 80.252.85.7 track 1
ip route 30.1.1.0 255.255.255.0 80.252.85.8 100 track 2


ip sla 1 icmp-echo 172.30.14.65 frequency 15 ip sla schedule 1 life forever start-time now ip sla 2 icmp-echo 172.30.14.69 frequency 15 ip sla schedule 2 life forever start-time now


track 1 rtr 1 reachability ! track 2 rtr 2 reachability


________________________________


7"<~HK#: Mohammad Saeed
7"KMJ1<d#: 2007-02-02 07:47:57
JU<~HK#: Cisco certification
3-KM#: Anwar CCIE; Sameer Dubai CCIE; Saad Elias
VwLb#: rtr reaction-config OR reaction-trigger


Hi All,


I have configured rtr 1 that is sending ping to a
remote ip 54.1.1.254
through s0/0. If this ping is successful RTR
operations return code is
OK, but if it fails code will be Timeout (Negative).

My question is that is there any way that I can configure
reaction-trigger to shutdown interface fa0/0 of the
same router if the
operation return code of that rtr is Timeout?

OR is there any way of configuring static/default route
with
monitoring the rtr 1 and if its operation return code
is Timeout, the
route shall remove that static/default route from
the routing table?

This is a real life scenerio, we want to configure
two default routes
on our clients routers:

ip route 0.0.0.0 0.0.0.0 192.168.1.1 250

ip route 0.0.0.0 0.0.0.0 172.16.1.1 100

and attach rtr 1 with first route that if some
particular ip is not
reachable on the internet, router shall remove
that default route and
put the second one with 100 Administrative Distance
in the Routing
Table?????

I thank in advance for any help in this regard.....

Regards,

Mohammad Zahed Saeed

_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html