Search for Enhanced Object Tracking.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122
t/122t15/fthsrptk.htm
--
http://dcp.dcptech.com
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On
> Behalf Of Mohammad Saeed
> Sent: Thursday, February 01, 2007 6:41 PM
> To: Cisco certification
> Cc: Anwar CCIE; Sameer Dubai CCIE; Saad Elias
> Subject: rtr reaction-config OR reaction-trigger
>
> Hi All,
>
> I have configured rtr 1 that is sending ping to a remote ip
> 54.1.1.254 through s0/0. If this ping is successful RTR
> operations return code is OK, but if it fails code will be
> Timeout (Negative).
>
> My question is that is there any way that I can configure
> reaction-trigger to shutdown interface fa0/0 of the same
> router if the operation return code of that rtr is Timeout?
>
> OR is there any way of configuring static/default route with
> monitoring the rtr 1 and if its operation return code is
> Timeout, the route shall remove that static/default route
> from the routing table?
>
> This is a real life scenerio, we want to configure two
> default routes on our clients routers:
>
> ip route 0.0.0.0 0.0.0.0 192.168.1.1 250
>
> ip route 0.0.0.0 0.0.0.0 172.16.1.1 100
>
> and attach rtr 1 with first route that if some particular ip
> is not reachable on the internet, router shall remove that
> default route and put the second one with 100 Administrative
> Distance in the Routing Table?????
>
> I thank in advance for any help in this regard.....
>
> Regards,
>
> Mohammad Zahed Saeed
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
