Hi,
Does this helps?
SW1(config)#macro name PING
Enter macro commands one per line. End with the character '@'.
do ping 10.5.5.5
do ping 10.10.67.7
@
SW1(config)#
SW1(config)#macro global apply PING
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.5.5.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/9 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.67.7, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
SW1(config)#
Saludos,
Victor.-
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00802cb624.html#wp1162003
-----Mensaje original-----
De: nobody@xxxxxxxxxxxxxx en nombre de Raj Bansal
Enviado el: sab 27/01/2007 14:41
Para: ccielab@xxxxxxxxxxxxxx
Asunto: CAT script to test reachability
Folks,
I understand there is a script to test IGP reachability from the CAT switches. Is this correct?
Thanks.
Raj
---------------------------------
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
