You can use the command: show snmp mib ifmib ifindex
FRS(config)#snmp-server community public ro
FRS#show snmp mib ifmib ifindex
FastEthernet0/0: Ifindex = 1
Null0: Ifindex = 8
VoIP-Null0: Ifindex = 7
Serial1/0: Ifindex = 3
FastEthernet0/1: Ifindex = 2
Serial1/1: Ifindex = 4
Serial1/2: Ifindex = 5
Serial1/3: Ifindex = 6
Loopback107: Ifindex = 9
A good resources for learning more about SNMP would be:
The O'Reilly book, Essential SNMP
Hope that helps,
Bob Sinclair
CCIE 10427 CCSI 30427
www.netmasterclass.net
-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
ccie_sp@xxxxxxxxxxx
Sent: Sunday, January 14, 2007 5:33 AM
To: ccielab@xxxxxxxxxxxxxx
Subject: RMON
Hi all,
I am not so good in SNMP and I would like to learn it better
Does someone have a good resource about OID values and how to map them to an
interface, in the way of
you have an object for example InPktsQ, each interface would have a
different
value.
For example IFMIB int f0/0 = 1
and interface IFMIB f0/1 = 2
Am I okay to say that IntPktsQ.1 is the Incoming packets for the f0/0
interface and .2 for f0/1
What's the value for (sub)interfaces?
So my actual question is how can I map SNMP/RMON OID to interfaces, since
it's
also possible to type int the BIG string something like 1.3.5.2.3.5.6.2.
whats
the difference or is it just like a named value for the big string??
I can't find an good resource which explains these mappings and for example
how you can find out that interface f0/1 = .3 and not = .4
Thanks groupstudy
_________________________________________________________________
Probeer Live.com: jouw leven online met nieuws, sport, weer en nog veel
meer.
http://www.live.com/getstarted
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
