GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: 3640 will not load image [bcc][faked-from] posted 10/19/2006
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Brad,

The router boots fine with 32 in bank 0 and 32 in bank
1. Total of 64mb. As I try to grasp to any hope left.
With the information  I just gave you. Do you think I
am still SOL. Any comments will be greatly
appreciated.

-marc

--- Brad Ellis <brad@xxxxxxxxxxxxxx> wrote:

> I'm leaning towards you're SOL and have a bad
> router.
> 
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI#30482
> Network Learning Inc - A Cisco Sponsored
> Organization (SO)
> YES! We take Cisco Learning credits!
> brad@xxxxxxxxxxxxxx
> www.ccbootcamp.com (Cisco Training and Advanced
> Technology Rental Racks)
> Voice: 702-968-5100
> FAX: 702-446-8012
> ----- Original Message ----- 
> From: "marc fernandez" <mag08036@xxxxxxxxx>
> To: "Victor Cappuccio" <cvictor@xxxxxxxxxxxxxxxxx>;
> <ccielab@xxxxxxxxxxxxxx>
> Sent: Thursday, October 19, 2006 6:10 PM
> Subject: RE: 3640 will not load image
> [bcc][faked-from]
> 
> 
> > OK I tried this. When I remove sticks in bank 2
> and 4
> > it boots. So what do I do next. Per cisco it
> mentions
> > that to support 128MB you must have bank 0, 1 ,2
> ,3
> > configured for 32dual = 128mb respectively. Is
> there a
> > certaing configuration I need to do with
> memory-size
> > iomem in order for my router to support 128mb or
> am I
> > out of luck. Help is needed.
> >
> > -marc
> >
> > --- Victor Cappuccio <cvictor@xxxxxxxxxxxxxxxxx>
> > wrote:
> >
> >> Yes did you tried this:
> >>
> >> =======
> >>
> >> De: nobody@xxxxxxxxxxxxxx
> >> [mailto:nobody@xxxxxxxxxxxxxx] En nombre de Brad
> >> Ellis
> >> Enviado el: Sabado, 14 de Octubre de 2006 12:38
> a.m.
> >> Para: marc fernandez; ccielab@xxxxxxxxxxxxxx
> >> Asunto: Re: 3640 will not load image
> >> [bcc][faked-from]
> >>
> >> I've seen this before...try the following:
> >>
> >> 1) re-download a very small ip only 3640 image
> and
> >> try that
> >> if (1) doesnt work, then (2) try replacing the
> dram
> >> and try the upgrade
> >> again
> >> if (2) doesnt work, then (3) try replacing the
> flash
> >> (although it doesnt
> >> appear to be a flash issue)
> >>
> >> thanks,
> >> Brad Ellis
> >> CCIE#5796 (R&S / Security)
> >> CCSI#30482
> >> Network Learning Inc - A Cisco Sponsored
> >> Organization (SO)
> >> YES! We take Cisco Learning credits!
> >> brad@xxxxxxxxxxxxxx
> >> www.ccbootcamp.com (Cisco Training and Advanced
> >> Technology Rental Racks)
> >> Voice: 702-968-5100
> >> FAX: 702-446-8012
> >>
> >>
> >> -----Mensaje original-----
> >> De: marc fernandez [mailto:mag08036@xxxxxxxxx]
> >> Enviado el: Sabado, 14 de Octubre de 2006 12:39
> p.m.
> >> Para: Victor Cappuccio; ccielab@xxxxxxxxxxxxxx
> >> Asunto: RE: 3640 will not load image
> >>
> >> Tried all of the steps below. Including output
> >> interpretor but I'm still getting the following
> >> error
> >> after image download. Any comments or ideas on
> what
> >> to
> >> do?
> >>
> >> Error : Uncompression of the image failed.
> >> invalid compressed data--format violated
> >>
> >> Error : zip decompress failed
> >>
> >> *** System received a Software forced crash ***
> >> signal= 0x17, code= 0x7, context= 0x8000eac0
> >> PC = 0x800080d4, Cause = 0x20, Status Reg =
> >> 0x3041f003
> >>
> >> -marc
> >>
> >> --- Victor Cappuccio <cvictor@xxxxxxxxxxxxxxxxx>
> >> wrote:
> >>
> >> > Paste that information in the Cisco Output
> >> > interpreter
> >> >
> >>
> >
>
https://www.cisco.com/pcgi-bin/Support/OutputInterpreter/home.pl
> >> >
> >> > ERROR: A 'Software-forced Crash' error occurs
> when
> >> > the router detects a
> >> > severe, unrecoverable error, and reloads itself
> to
> >> > prevent transmission of
> >> > corrupt data.
> >> >
> >> > This error may be caused by watchdog timeouts,
> low
> >> > memory, corrupt software
> >> > image,or hardware problems.
> >> >
> >> > TRY THIS: (please note that there are URLs in
> the
> >> > following text, so go to
> >> > OInterpreter Page to check out detail
> information)
> >> >
> >> > 1. Please refer to TAC Case Collection -
> >> > Software-forced crash for
> >> > troubleshooting.
> >> > 2. If the "Error : pre and post compression
> image
> >> > sizes disagree" console
> >> >    message is displayed along with 'Software
> >> forced
> >> > crash' message, please
> >> > refer
> >> >    to TAC Case Collection - Software-forced
> crash
> >> > (pre and post compression)
> >> > for
> >> >    troubleshooting.
> >> > 3. If the "Not enough memory in the system to
> run
> >> > this image" console
> >> >    message is displayed along with the
> >> > 'Software-forced Crash' message,
> >> > please refer
> >> >    to TAC Case Collection - Software-forced
> crash
> >> > (not enough memory) for
> >> > troubleshooting.
> >> > REFERENCE: For more information, see
> Understanding
> >> > Software-forced Crashes.
> >> >
> >> > REFERENCE: For more information, see:
> >> >   Troubleshooting Router Crashes
> >> >   Less Common Types of System Crashes
> >> >
> >> >
> >> >
> >> > -----Mensaje original-----
> >> > De: nobody@xxxxxxxxxxxxxx
> >> > [mailto:nobody@xxxxxxxxxxxxxx] En nombre de
> marc
> >> > fernandez
> >> > Enviado el: Viernes, 13 de Octubre de 2006
> 10:40
> >> > p.m.
> >> > Para: ccielab@xxxxxxxxxxxxxx
> >> > Asunto: 3640 will not load image
> >> >
> >> > I have a 3640 which had no mem or flash and
> would
> >> > not
> >> > boot. I  upgraded it to 128D/32F. Tried to
> >> download
> >> > flash via xmodem but image still won't load. I
> now
> >> > can
> >> > only access it via rommon. Does anyone have any
> >> > answers in regards to what I am doing wrong or
> >> what
> >> > is
> >> > wrong? below is the constant reboot I get after
> a
> >> > reset as there is no image on the box when I do
> a
> 
=== message truncated ===


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com