GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
Re: RMON && snmp-server enable traps posted 10/06/2006
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Oops :-) Try the link below.

http://www.cisco.com/warp/public/477/SNMP/snmp_traps.html


On 10/7/06, srdja blagojevic <srdja1@xxxxxxxxxxx> wrote:
>
> Noble,
>
> I am aware of set of traps that are enabled by this command, but I am
> unaware of set of traps that are not enabled by this command (like rmon,
> that are enable by default, according to Kuscar post), and I just needed
> some document to clarify (and verify) this.
>
> thanks anyway :)
>
> Srdja
>
> _____
>
> From: Noble, TN [mailto:noble.pillai@xxxxxxxxx]
> Sent: Friday, October 06, 2006 20:09
> To: srdja blagojevic
> Cc: Kulcsar Andras Benjamin; Radoslav Vasilev; Cisco certification
> Subject: Re: RMON && snmp-server enable traps
>
>
> The best way to look at it is to apply this command and then check the
> config. You will see a set of default set of traps enabled with this
> single
> command.
>
> Other option is to selectively enable the required traps by adding the
> required trap typeat the end of this command.
>
> snmp-server enable traps frame-relay - this will enable the trap for DLCI
> status change.
>
> Just my two cents,
>
> -Noble
>
>
>
>
> On 10/6/06, srdja blagojevic <srdja1@xxxxxxxxxxx> wrote:
>
> Hi,
>
>
> For command "snmp-server enable traps" Doc CD:  "Most notification types
> are
>
> disabled. However, some notification types cannot be controlled with this
> command. "
>
> What traps are not contolled with "snmp-server enable traps" command, ie.
> for what traps I do not have to enter this command, if I want to send trap
> to SNMP server? Any good link about this feature?
>
>
>
> Srdja
>
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx [mailto: nobody@xxxxxxxxxxxxxx
> <mailto:nobody@xxxxxxxxxxxxxx> ] On Behalf Of
> Kulcsar Andras Benjamin
> Sent: Friday, October 06, 2006 17:13
> To: Radoslav Vasilev; Cisco certification
> Subject: RE: RMON && snmp-server enable traps
>
> Hi,
>
> It is not necessary to use "snmp-server enable traps" at all if you only
> want rmon events:
>
> Rack1R3#
>
> Rack1R3#sh snmp
> %SNMP agent not enabled
>
> Rack1R3#sh run | incl snmp
> Rack1R3#conf t
> Enter configuration commands, one per line.  End with CNTL/Z.
>
> Rack1R3(config)#snmp-server host 145.1.37.4 COMM Rack1R3(config)#do debug
> snmp headers SNMP packet header debugging is on Rack1R3(config)#rmon event
> 1
>
> trap COMM owner config Rack1R3(config)#rmon alarm 1 lsystem.58.0 60
> absolute
> rising-threshold 0 1 falling-threshold 10 1 owner config
>
> *Aug 23 07:53:26.423: %RMON-5-RISINGTRAP: Rising trap is generated because
> the value of lsystem.58.0 exceeded the rising-threshold value 0 *Aug 23
> 07:53:26.435: %RMON-5-FALLINGTRAP: Falling trap is generated because the
> value of lsystem.58.0 has fallen below the falling-threshold value 10
>
> Outgoing SNMP packet
> *Aug 23 07:53:26.439: v1 packet
> *Aug 23 07:53:26.439: community string: COMM *Aug 23 07:53:26.443:
> Outgoing SNMP packet
> *Aug 23 07:53:26.443: v1 packet
> *Aug 23 07:53:26.443: community string: COMM Rack1R3(config)#do deb snmp
> packets SNMP packet debugging is on Rack1R3(config)#rmon alarm 1
> lsystem.58.0 60 absolute rising-threshold 0 1 falling-threshold 10 1 owner
> config Rack1R3(config)# *Aug 23 07:53:39.855: %RMON-5-RISINGTRAP: Rising
> trap is generated because the value of lsystem.58.0 exceeded the
> rising-threshold value 0 *Aug 23 07:53:39.867: %RMON-5-FALLINGTRAP:
> Falling
> trap is generated because the value of lsystem.58.0 has fallen below the
> falling-threshold value 10 *Aug 23 07:53:39.871: SNMP: Queuing packet to
> 145.1.37.4 *Aug 23 07:53:39.871:
> Outgoing SNMP packet
> *Aug 23 07:53:39.871: v1 packet
> *Aug 23 07:53: 39.871: community string: COMM *Aug 23 07:53:39.871: SNMP:
> V1
> Trap, ent rmon, addr 150.1.3.3, gentrap 6, spectrap 1
> alarmEntry.1.1 = 1
> alarmEntry.3.1 = lsystem.58.0
> alarmEntry.4.1 = 1
> alarmEntry.5.1 = 1
> alarmEntry.7.1 = 0
> *Aug 23 07:53:39.951: SNMP: Queuing packet to 145.1.37.4 *Aug 23
> 07:53:39.955:
> Outgoing SNMP packet
> *Aug 23 07:53:39.955: v1 packet
> *Aug 23 07:53:39.955: community string: COMM *Aug 23 07:53:39.955: SNMP:
> V1
> Trap, ent rmon, addr 150.1.3.3, gentrap 6, spectrap 2
> alarmEntry.1.1 = 1
> Rack1R3(config)#
> alarmEntry.3.1 = lsystem.58.0
> alarmEntry.4.1 = 1
> alarmEntry.5.1 = 1
> alarmEntry.8.1 = 10
>
>
> Best regards,
> Andras
>
> -----Original Message-----
> From: nobody@xxxxxxxxxxxxxx  <mailto:nobody@xxxxxxxxxxxxxx>
> [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
> Radoslav Vasilev
> Sent: Friday, October 06, 2006 4:44 PM
> To: Cisco certification
> Subject: RMON && snmp-server enable traps
>
> Hi Group,
>
> Let's say we have an rmon alarm and events configured already, where the
> action for the event should be trap. How do we enable the trap to be sent
> to
> an snmp host, if we don't want to enable all traps at the same time?
>
> For example, if we use:
> snmp-server enable traps
>
> this would enable all traps supported (well, almost all).
>
> How do I enable only the rmon-related traps to be sent? I suspect it all
> depends on the monitored value for the rmon alarm, but a confirmation from
> someone else would be better ;)
>
> Thanks!
> Rado
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
> --
> Just my two cents,
>
> -Noble
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>



-- 
Thank you,

-Noble