GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: neighbor x.x.x.x ebgp-multihop posted 08/11/2006
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Thx all. 

-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
Irfan Siddiqui
Sent: Friday, August 11, 2006 9:38 AM
To: trevelle@xxxxxxxxxx; ccielab@xxxxxxxxxxxxxx
Subject: RE: neighbor x.x.x.x ebgp-multihop

Even if the two devices are directly connected to each other if you are
peering by loopback two different AS's (ebgp) you will still need
ebgp-multihop together with update-source loopback. 

Irfan Siddiqui

V-SIP Changes Engineer

 



-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
trevelle@xxxxxxxxxx
Sent: 11 August 2006 15:28
To: ccielab@xxxxxxxxxxxxxx
Subject: neighbor x.x.x.x ebgp-multihop

I am currently working on LAB 3 of InternetWorkExpert workbook the Exterior
Gateway Routing section. Task 5.1. I was ask to peer R4 and R5 together. The
routers  our actually directly connected via 2 interfaces. When I check my
Solution guide the 2 routers are connected using the  neighbor x.x.x.x
ebgp-multihop command which I thought was only needed when you need to
connect bgp neighbors that are not directly connected. Could someone please
explain why I had to use this command? Thx.  

_______________________________________________________________________
Subscription information may be found at: 
http://www.groupstudy.com/list/CCIELab.html


**********************************************************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it are
confidential and solely for the use of the intended recipient.  If you are
not the intended recipient or the person responsible for delivering it to
the intended recipient, be advised that you have received this email in
error and that any dissemination, distribution, copying or use is strictly
prohibited.

If you have received this email in error, or if you are concerned with the
content of this email please e-mail to: e-security.support@xxxxxxxxxx

The contents of an attachment to this e-mail may contain software viruses
which could damage your own computer system. While the sender has taken
every reasonable precaution to minimise this risk, we cannot accept
liability for any damage which you sustain as a result of software viruses.
You should carry out your own virus checks before opening any attachments to
this e-mail. 
**********************************************************************

_______________________________________________________________________
Subscription information may be found at: 
http://www.groupstudy.com/list/CCIELab.html