Routing through a ppp ipcp negotiated interface posted 08/04/2006
- Subject: Routing through a ppp ipcp negotiated interface
- From: "Schulz, Dave" <DSchulz@xxxxxxxxxxxxxx>
- Date: Fri, 4 Aug 2006 16:40:57 -0400
- Content-class: urn:content-classes:message
- Thread-index: Aca4BknugaLt1ZTcRCOxf6nUcM6nZQ==
- Thread-topic: Routing through a ppp ipcp negotiated interface
I discovered something interesting while setting up a network in my lab
with using ppp ipcp to negotiate the address across a serial link. In
the following scenario, the address is negotiated fine. However, I am
trying to run the various protocols across the link. EIGRP, but RIP
will not allow the database to be received at the router with the
negotiated interface. OSPF will not allow the adjacency to form.
BTW....I can get the routes to be sent from the negotiated interface to
the remote (negotiating) interface of the remote router. I am just
trying things and investigating ....so this may not be valid to do this.
Just wondering why EIGRP works in this way, but OSPF and RIP do not.
On RIP...I get the following debug error.....(I tried this both
multicast and unicast updates, with no difference).
*Mar 16 11:07:12.927: RIP: ignored v2 update from bad source 18.104.22.168 on
Here are the configs at the interface level......
ip address negotiated
ip address 22.214.171.124 255.255.255.0
peer default ip address 126.96.36.199
clock rate 2000000
Dave Schulz, CCDP, CCNP, CCSP
Email: dschulz@xxxxxxxxxxxxxx <mailto:dschulz@xxxxxxxxxxxxxx >