GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: OT: DMVPN posted 03/20/2006
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


I have the eigrp command that I sent out in the last e-mail on a live
network,



Hub:

Int tun 123

no ip next-hop-self eigrp 100

no ip split-horizon eigrp 100



Spoke:

Int tun 123

no ip next-hop-self eigrp 100







  _____

From: Chris Broadway [mailto:midatlanticnet@xxxxxxxxx]
Sent: Monday, March 20, 2006 10:49 AM
To: Chris Cole
Cc: Mark Lasarko; groupstudy@xxxxxxxxxxxxxxxxx; ccielab@xxxxxxxxxxxxxx
Subject: Re: OT: DMVPN



Those should only go on the Hub.  I have those commands there. When I
shift the config to  A Hub to spoke configuration the same type of thing
happens, but the opposite.  I see neighbors on the hub, but not on the
spokes.  I removed the "ip next-hop-self" command from the hub. The only
difference between the two configs is that the spoke to spoke config
replaces the "tunnel destination" command with the "tunnel mode gre
multipoint" command. Any clues?



-Chris