- A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: Frame-relay BW statement question posted 03/15/2006
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]

Thanks, Rafay.  Is there anywhere that this can be noted in the
docCD....I couldn't locate it?

Dave Schulz,

Email: dschulz@xxxxxxxxxxxxxx <mailto:dschulz@xxxxxxxxxxxxxx%20>


From: Rafay Aslam [mailto:smrafay@xxxxxxxxx]
Sent: Wednesday, March 15, 2006 4:04 PM
To: Schulz, Dave
Cc: ccielab@xxxxxxxxxxxxxx
Subject: Re: Frame-relay BW statement question

it is the clock rate ....

On 3/15/06, Schulz, Dave <DSchulz@xxxxxxxxxxxxxx> wrote:

Group - I have a frame relay question.....  on the following show frame
map, it shows BW=256000.  The documentation is a bit silent on this
issue, but is this determined by the cir of the line, or, the clock
speed that the interface is receiving.  There is no bandwidth statement
configured.  TIA.

MINN#sh frame map
Serial0.302 (administratively down): point-to-point dlci, dlci
, broadcast
         status deleted,
             RTP Header Compression  (inherited), connections: 256
Serial0.330 (up): point-to-point dlci, dlci 330(0x14A,0x50A0),
broadcast, BW = 256000
         status defined, active,
             RTP Header Compression  (inherited), connections: 256


Subscription information may be found at: