GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
OT: WIC-1AM Card? posted 03/02/2006
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Hey Group,

            Has any one setup a dial-in remote management with on of
these WIC-1AM cards?

Async0/3/0 is up (spoofing), line protocol is up (spoofing)
  Hardware is GT96K SmartSCM Integrated Modem
  Interface is unnumbered. Using address of Loopback0 (10.64.0.20)
  MTU 1500 bytes, BW 56 Kbit, DLY 100000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation SLIP, loopback not set
  DTR is pulsed for 5 seconds on reset
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)
     Conversations  0/0/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 42 kilobits/sec
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     0 packets input, 0 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=down  DSR=up  DTR=up  RTS=up  CTS=up


line 0/3/0
 modem InOut
 modem autoconfigure discovery
 transport input all
 transport output all
 stopbits 1
 speed 115200

Dennis Worth
Network Engineer
Option One Mortgage
phone. 949-790-3687
dennis.worth@xxxxxxxx <mailto:dennis.worth@xxxxxxxx>