GroupStudy.com GroupStudy.com - A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: eigrp equal cost load balance posted 07/11/2005
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]


Sheikh, have you solved the problem about load balancing? ( see attached text).
 
TIA
George
 
--------------------------------------------------------
 
 
 
Yes it should because they have two separate next-hop values.  Did you
try what I said with the "maximum-paths" command?

Brian McGahan, CCIE #8593
bmcgahan@xxxxxxxxxxxxxxxxxxxxxx

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/


> -----Original Message-----
> From: Sheikh Rahman [mailto:Sheikh.Rahman@xxxxxxxxxxxxx]
> Sent: Thursday, June 23, 2005 2:16 PM
> To: Brian McGahan
> Subject: RE: eigrp equal cost load balance
>
> Hi Brian,
>
> Will Eigrp load-balance between 2 neighbors through one interface. Let
> me expalin youmy network topology little more in detail.
>
>     --  R2   OSPF
> Sw  Eigrp       ---- ----------- R1
>     --- R3
>
>
> Sw, R2 and R3 e0 interface running eigrp and R2,R3's serial interface
> and R1 running OSPF
>
> OSPF and eigrp are being redistributed in R2 and R3. R1 (ospf) is able
> to load balance to prefixes learned from Eigrp. But Sw is not able to
> load balance prefixes learned from OSPF. When redistributed ospf route
> to eigrp metric was same on both router. R2 and R3 is using sw's vlan2
> interface.
>
> Not sure eigrp load balance between 2 neighbor through same interface
in
> this case sw will use vlan2 interface to communicate with the R2 and
R3
> router.
>
>
> Your help will be highly appreciated.
>
> Thanks
>
> Sheikh


		
---------------------------------
Yahoo! Mail: gratis 1GB per i messaggi, antispam, antivirus, POP3