- A virtual community of network engineers
 Home  BookStore  StudyNotes  Links  Archives  StudyRooms  HelpWanted  Discounts  Login
RE: DLSW in Extended Access-list posted 03/27/2004
[Chronological Index] [Thread Index] [Top] [Date Prev][Date Next] [Thread Prev][Thread Next]

Hello Jano,
The first thing I would do is research to find out what port DLSW port
uses. I am very confident that you could probably find the answer if you
do some basic searching. First place to search would be the archives,
then I would search Cisco's website. I could tell you the answer, but by
finding the answer yourself you are more able to retain the information

-----Original Message-----
From: nobody@xxxxxxxxxxxxxx [mailto:nobody@xxxxxxxxxxxxxx] On Behalf Of
Sent: Saturday, March 27, 2004 3:57 PM
To: ccielab@xxxxxxxxxxxxxx
Subject: DLSW in Extended Access-list

Hey everyone,

I need to configure a named access list. Ok, the IP and routing part is
easy, but the problem is that DLSW must also be allowed. The moment I
apply my inbound access-list I loose connectivity to my DLSW peer.
How do I specify and permit DLSW in this list?

ip access-list extended INBOUND
permit tcp any eq telnet
permit tcp any eq ftp
permit tcp any any eq smtp
permit tcp any any eq www
permit udp any any eq tftp
permit icmp any any
permit igrp any any
permit tcp any any eq bgp


Please help support GroupStudy by purchasing your study materials from:

Subscription information may be found at: