From: Richard Dumoulin <richard.dumoulin@xxxxxxxx>
To: Packet Man <ccie2b@xxxxxxxxxxx>, ccielab@xxxxxxxxxxxxxx
Subject: RE: BGP command - show ip bgp dampening parameters
Date: Tue, 2 Mar 2004 22:40:00 -0000
I tried it on my 1710, see below
BB3#sh ip bgp dampening ?
dampened-paths Display paths suppressed due to dampening
flap-statistics Display flap statistics of routes
parameters Display details of configured dampening parameters
BB3#sh ip bgp dampening param
BB3#sh ip bgp dampening parameters ?
| Output modifiers
<cr>
BB3#sh ip bgp dampening parameters
% dampening not enabled.
BB3#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(11)T8, RELEASE SOFTWARE
(fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 29-Mar-03 16:01 by hqluong
Image text-base: 0x80008124, data-base: 0x80A945C8
ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
BB3 uptime is 1 week, 6 days, 10 hours, 14 minutes
System returned to ROM by reload at 20:50:58 UTC Tue Mar 9 1993
System restarted at 00:00:01 UTC Mon Mar 1 1993
System image file is "flash:c1700-sy-mz.122-11.T8.bin"
cisco 1721 (MPC860P) processor (revision 0x100) with 29492K/3276K bytes of
memory.
Processor board ID FOC07090ARM (3554403555), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
--Richard
-----Mensaje original-----
De: Packet Man [mailto:ccie2b@xxxxxxxxxxx]
Enviado el: martes, 02 de marzo de 2004 23:24
Para: ccielab@xxxxxxxxxxxxxx
Asunto: BGP command - show ip bgp dampening parameters
Hi group.
In Solie's Practical Studies vol II, on page 820, he shows an example of
the
above command. I tried to find it in the command reference since it seems
to not be available on my 2500 routers running 12.2 (d).
I expected I would find that the command didn't appear until 12.3 or wasn't
available on the 2500 platform. However, I didn't find it at all using the
command lookup tool.
Any ideas?
Thanks, PM
_________________________________________________________________
Find things fast with the new MSN Toolbar includes FREE pop-up blocking!
http://clk.atdmt.com/AVE/go/onm00200414ave/direct/01/
_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
